PW11340 MWG Refurbishment

Closes in 8 daysSubmission deadline: 11 November 2026, 02:00 PM Australia/Perth

About this tender

Overview Programmed Facility Management Pty Ltd (PFM), on behalf of the Department of Housing & Works, is seeking quotes from suitably qualified and experienced contractors to undertake refurbishment works at 18 Rifle Range Road, Rangeway, Western Australia. About The property is identified as Property ID 93280, managed by the Department of Communities (GROH). Scope The work includes but is not limited to internal and external refurbishment works at 18 Rifle Range Road, Rangeway WA 6530. Technical specifications are to be referred to and adhered to for all works. External Replace letterbox complete including high vis number (52) post to be mounted on 65mm x 65mm post Replace damaged eaves to front and rear x 48 m2; remove any unwanted fixtures/nails from external brickwork Supply and install new external taps, new downpipes complete (Colorbond, Classic Cream); replace any missing drain covers; install soak wells and connect downpipes Replace external power points with weatherproof power points; replace prismatic light/s with prismatic LED x 3 Restore/paint roof complete including flumes (Colorbond, Manor Red); paint gutters (Manor Red) and fascia (Classic Cream); paint roof timbers (Manor Red); paint eave lining (White); paint meter boxes (Classic Cream); paint external side of doors and frames including threshold (Classic Cream) Remove front right driveway gates/fencing and supply and install new 1.8m double Colorbond gates and wing fencing (including old broken off panels in the ground); front left: supply and install new 1.8m Colorbond single access gate and 1.8m Colorbond wing fence panel Tree maintenance: lop back bushes to allow for fence replacement to right wing area; prune back overhanging trees to fence line and all trees from property; remove dead palm fronds; remove fixtures to rear left fence/gutters Heavy clean down fascias, eaves, walls, floors and paved areas; clean out gutters and valleys; mow/slash yards and rake up debris/litter; weed front garden beds; remove rubbish and glass from yards; eradicate and remove purple flower vine growing over fenceline; remove weeds growing in fencing retaining wall; fill all depressions to yard levelling where required; heavy clean external windows and screens Carpentry (Internal) Install curtain batten and brackets over window/door frames (all rooms) Replace barrier/security doors with Crimsafe trilock door keyed alike (Colorbond Classic Cream) to entry/lounge, kitchen/dining and laundry; install fixed barrier screen to fixed glass door pane (kitchen/dining, laundry) Supply and install Invisiguard to windows (no safe escape due to door exits), Colorbond Classic Cream frame fitted to be bug proof, no flywire Patch all holes/cracks to walls and ceilings; patch ceiling once existing lights/exhaust fans are removed; tomb up ceilings to secure Re-sheet impact/water damaged walls: entry/lounge approx. 18.2 m2; kitchen/dining approx. 8.2 m2; passage approx. 11.5 m2; bedrooms 1 to 4 approx. 5.3 m2 each Replace skirtings, damaged mouldings/architrave to window and door frames, water damaged jambs to window frame; secure external door frame Replace floor mounted door buffers; replace flush panel doors and passage sets to bedrooms; replace waterproof flush panel doors to bathroom, toilet and laundry; replace privacy sets Kitchen: replace kitchen cupboards and benchtop x 3.7 mt (note modification for wall oven, hot plate and microwave nook), island bench cupboard and benchtop x 2.4 mt, drawer set and benchtop x 1 (Laminex Sand Pebble); replace flush panel doors to pantry, install dummy set, replace/install ball safety catches, replace shelving; replace overhead cupboards extending from pantry to window frame with rangehood installation; supply and install ceramic splashback wall tiles including above new cupboard area between stove and pantry (gloss white 200mm x 400mm) Passage: replace shelves and flush panel doors to linen cupboard, install dummy set to linen doors Bathroom: supply and install new toilet roll holder, 2 x towel rails complete with brackets, new 3 door vanity on brick hob (Laminex Sand Pebble), new soap dish to shower; replace ceiling and cornice x 6.9 m2; waterproof shower recess and bath area (to technical specifications); replace bath area wall/hob sheeting with villiaboard; install aluminium diminishing strip to doorway Toilet: replace toilet roll holder; replace ceiling and cornice x 1.7 m2 Laundry: install 2 door bench top cupboard where existing trough is, built on brick hob (Laminex Sand Pebble); replace villiaboard wall sheeting to suit new laundry trough design Glazing Replace aluminium glazed windows complete with 1 fixed pane and 1 sliding pane, no window lock to be fitted, catch only (Classic Cream), to entry/lounge, bedrooms 1 to 4 and bathroom Kitchen/dining: replace aluminium glazed glass sliding door complete with fixed pane (Classic Cream); replace rollers to sliding window Bathroom: replace vanity mirror; install shower screen with pivot door to shower recess Flooring Remove existing tiles/vinyl and install vinyl planks, levelling floor where required: entry/lounge 30.6 m2; kitchen/dining 26.1 m2; passage 6.3 m2 (Polyflor Ash 4455); bedroom 1 15.5 m2 (Polyflor Cornish Blond Oak 4467); bedrooms 2, 3 and 4 10.5 m2 each (Polyflor Ash 4455) Bathroom and toilet: replace ceramic floor (European Ceramics Homeland White); replace wall/skirting tiles (Gloss White 200 x 400mm) Laundry: replace floor tiles x 3.5 m2 (Homeland White); replace wall/skirting tiles (Gloss White 200 x 400mm) Plumbing and Gas Kitchen: replace double bowl sink; install flickmixer with mini stop taps to flexi leads; disconnect and seal gas line Entry/lounge: disconnect and seal gas line removing Bathroom: replace shower rose, puddle flange, floor waste; replace shower and vanity tap spindles with flick mixer including piping conversion and mini stop taps to vanity; replace bath spout; replace bath taps with flickmixer; replace toilet, cistern, flexi lead and quarter turn stop tap Toilet: replace ped pan, cistern, flexi lead and quarter turn stop tap Laundry: replace floor waste and washing machine taps; disconnect laundry trough tap and spout set and replace with flick mixer with mini stop taps to flexi leads to new trough sink; supply and install new trough insert to fit new cupboard design Electrical Entry/lounge: install TV point connected to TV antenna (cable fed through wall and ceiling); replace light switch and power points; install LED lights x 3; replace electrical meter box complete (flush on wall); replace RCD complete Kitchen/dining: replace double power points; disconnect fluorescent light and batten holder; supply and install LED recess lights x 5 (2 kitchen, 3 dining); disconnect existing ceiling exhaust fan; install rangehood flumed to roof with ducting; install electric wall oven; install electric stove top with isolation switch clearly labelled; install additional power point for microwave nook; install additional power point, isolator and conduit for new wall oven and stove top Passage: disconnect existing batten holder; replace single light switches; install LED lights x 2 Bedrooms 1 to 4: disconnect existing light; supply and install LED lights x 2; replace light switch and power points Bathroom: replace light with recessed LED; replace light/fan switch; replace power point; replace ceiling exhaust (flumed to roof with ducting), disconnect existing exhaust fan Toilet: replace single light switch with double light switch (fan/light); replace batten holder with LED downlight; install ceiling exhaust fan with ducting and flume to roof Laundry: replace light switch; replace batten holder with LED downlight; replace double power point Painting Paint all rooms complete, renew set coat to walls where required: entry/lounge 30.6 m2; kitchen/dining 26.1 m2; passage 6.3 m2; bedroom 1 15.5 m2; bedrooms 2 and 3 10.5 m2 each; bedroom 4 9.3 m2; bathroom 6.93 m2; toilet 1.7 m2; laundry 3.5 m2 Skirtings, architrave and window frames are to be painted Colour scheme: fixtures (doors and frames, skirting, architraves, quads, timber window frames, balustrade, trough cabinets etc) White 100% Full Gloss Enamel; ceiling and cornice White 100% Low Sheen Acrylic; walls Dulux Hog Bristle Half Strength 100% Low Sheen Acrylic; wall tiles Ceramic Gloss White 200mm x 400mm; kitchen, laundry and bathroom cabinetry Laminex Sand Pebble Additional Information Kitchen and laundry layout has been modified Kitchen, laundry and bathroom designs are to be supplied and approved prior to commencement Property to be left in clean and tidy condition All cupboards are to be cleaned All floors are to be vacuumed and mopped Allowance to prune back trees/bushes for painting Contractor Requirements All materials and installation shall be supplied and be in accordance with Australian Standards and all codes and regulations relevant to the scope of work Instructions to Tenderers Tenderers shall make themselves familiar with the existing site conditions, the specifications, drawings and all Contract documentation. All measurements and details shown on drawings or other documents (if any) are to be confirmed by Tenderers prior to submission of their Quote. Site Inspection A site visit will be held for this opportunity. Date: 16 October 2026 Time: 10:00 AM Location: 18 Rifle Range Road, Rangeway

How to respond to this tender

A strong tender response is clear, compliant, and backed by evidence. These steps apply to most Australian and New Zealand public tenders.

Read the requirements in full

Open the official listing and download the full tender pack. Note the response schedules, evaluation criteria, mandatory conditions, and the exact closing time and lodgement method.

Confirm you are eligible and it is worth bidding

Check licences, insurances, certifications, and any conformance requirements before you commit. A quick bid or no-bid decision saves days of wasted effort on a tender you cannot win.

Answer every criterion with evidence

Respond to each evaluation criterion directly and back your claims with concrete examples, referees, and past performance. Address the buyer’s stated need, not a generic capability statement.

Lodge early through the official portal

Submit through the source portal well before the deadline. Late or incorrectly lodged bids are almost always rejected, so leave time for uploads, portal errors, and last-minute questions.

Ready to write winning tenders?

Sign up today, what a relief.

Sign up

Similar public opportunities

Review the lifecycle label on each related notice to see whether submissions are open.