Duaringa SES Generator Fencing

Overview Central Highlands Regional Council requires a galvanised steel fence and swing gate to be installed around the Duaringa SES Shed and Generator. Scope The scope includes: Supply and installation of a galvanised steel fence and chain wire mesh enclosure measuring 4.5 metres wide by 7.5 metres long Total fence perimeter of 24.00 linear metres, including the gate opening Overall fence height of 2400 mm, using 2400 mm high galvanised steel posts 1800 mm high galvanised chain wire mesh with 50 mm diamond mesh and 2.5 mm or 3.15 mm galvanised wire Three strands of barbed wire across the top of the fence Galvanised steel posts concreted into the ground to a minimum depth of 600 mm, fitted with galvanised steel post caps Works to comply with CMDG-G-11 Drawing (Layout1) Supply and installation of a swing gate suitable for pedestrian access, matching the adjoining fence construction with galvanised steel framework and 50 mm diamond chain wire mesh Gate height of 1800 mm with three strands of barbed wire above, where compliant with applicable safety requirements Gate fitted with heavy-duty galvanised hinges, a suitable latch and provision for padlocking Gate posts appropriately sized and securely concreted into the ground to a minimum depth of 800 mm, with footing dimensions suitable for the gate load and ground conditions Gate to swing freely and operate smoothly without obstruction, with gate location and swing direction to be confirmed with Council prior to installation All double swing gates and single pedestrian access gates fitted with heavy-duty galvanised steel hinges and lockable gate hardware suitable for security fencing Tamper-resistant hinges designed to prevent unauthorised removal of the gate when closed and locked Gates fitted with a heavy-duty galvanised steel latch and lockable hasp or equivalent locking arrangement suitable for a Council-supplied padlock Double swing gates fitted with galvanised steel drop bolts to secure the inactive gate leaf in the closed position Gate hinges and locking mechanisms suitable for external conditions, corrosion-resistant and capable of withstanding regular use All gates to open and close smoothly without binding or sagging and be securely lockable in the closed position All gate hardware and fittings to comply with CMDG Standard Drawing CMDG-G-011 Revision F, where applicable Provision of safe temporary barricading of the work area, restricting public access in accordance with relevant legislation and Codes of Practice Cleaning up of work areas upon completion, including removal and lawful disposal of all waste materials and debris Contractor Requirements All workers must be registered on Council's LinkSafe (Safety Management) Program Contractor must adhere to all Council Safety and Management Systems, Policies and Procedures Contractor must ensure all work areas are maintained in a safe condition throughout the works Contract Terms and Conditions Works are projected to be completed by the end of December 2026 Contractors should attempt to tie in with other works in the general area to save mobilisation or other costs The Contract Price will be a fixed lump sum amount The Contract Price is deemed to include all labour, materials, plant, equipment, excavation, concrete footings, fencing, swing gate, gate hardware, installation, waste removal and all other provisions and requirements specified in the RFQ/Scope of Work No costs associated with additional works will be accepted by Council without prior written approval from Council Instructions to Tenderers Offers will be evaluated against the following criteria: Conformance to requirements (10%) Capability and Experience (10%) Ability to meet the timeframes (10%) Cost and Value for Money (50%) Minimise Mobilisation, Tie in with other local work (10%) Development of Competitive Local Business and Industry (10%)