MI187583- Lot 140 Levi Street, St Pauls (Bathroom Upgrade)

Overview The Torres Strait Island Regional Council is seeking a contractor to undertake a bathroom upgrade at Lot 140 Levi Street, St Pauls, including conversion to stud frame construction and replacement of the existing bathroom door. Scope The scope includes: Removal of all associated fittings as required Removal and disposal of existing floor coverings Removal and disposal of existing bathtub/shower, shower combination and tap ware Removal and disposal of existing FC wall and ceiling sheeting Replacement of all damaged or rotten jambs, architraves and mouldings Supply and installation of new 6mm FC sheeting to walls and ceiling Wet sealing of the bathroom to Standards in accordance with AS 3740, including the entire floor area and floor wall junctions (minimum of 200mm), and the bath tub and shower area (to a minimum height of 1800mm) Supply and installation of a new bathtub/shower to match existing (approximately 1460 x 870mm), complete with a new stainless steel shower/bath combination, bath spout, shower rose and tap ware meeting a minimum 3-Star Wells Water Efficiency rating as per the Queensland Development Code (no copper in wall) Supply and installation of a glass shower screen to the end of the bath as existing, and a shower curtain and rail along the length of the bath as per existing Supply and installation of ceramic glazed wall tiles to wet areas of the bath/shower Supply and installation of ceramic glazed wall tiles to the vanity splashback (minimum 400mm high) Supply and installation of new white Lamipanel to all walls and ceiling, including new treated timber cornice, installed as per manufacturer's recommendations using no mechanical fixings Supply and installation of a new 890mm wide Cartia waterproof floor mounted vanity cabinet kit, complete with a new stainless steel combination, single bowl ceramic top with overflow and tap ware meeting a minimum 3-Star Wells Water Efficiency rating as per the current Queensland Development Code Doors, drawers and seen ends in high gloss white colour, with soft closing and finger pull or chrome handle pull; floor mounted vanity cupboard supported on standard 150mm high high gloss white kicker boards, with the carcass securely fixed and the new ceramic top sealed onto the ceramic tiled splashback with a white/clear, mould resistant, acid (acetoxy) cure bathroom/kitchen silicone sealant Use of required products: Cartia Australia Arlington or Coral vanity ranges (if the factory Cartia vanity size does not fit the original space, a standard vanity unit is to be built and installed to match the opening) Supply and installation of a new floor waste to manufacturer's requirements, ensuring a fall in the floor to drain the surface (also applicable to voluntarily included floor wastes) Supply and installation of new 200 x 200mm tiles with an R10 slip rating when wet and an X pendulum rating to the floor, ensuring falls to waste, including tiled skirting of one tile high, complying with AS/NZS 4586 Supply and installation of two new towel rails (1200mm x 32mm stainless steel grab rail), a soap dish and a mirrored shaving cabinet Supply and installation of new obscure film laminate to the existing bathroom window (currently clear glass) Upgrade of all plumbing as required, including installation of a tempering valve if required Upgrade of all electrical to the bathroom to meet AS3000, including a new IP54 light fitting and double GPO Repainting of all areas including walls, window frames, and new and disturbed areas, with a paint finish of full gloss enamel for doors and trims and full gloss acrylic for walls; all new doors to be primed and painted in their entirety Replacement of the existing door with a new redicote honeycomb door, complete with 3 x 100mm hinges and associated new hardware and furniture, with the entire door primed and painted with an enamel paint system on completion to match existing surfaces Contractor Requirements Provision of a certificate and manufacturer's warranty for wet sealing within 2 weeks of practical completion