Open government and public tenders
Find open Australian and New Zealand tenders by state, then write a winning response with Scryve.
Find open Australian and New Zealand tenders by state, then write a winning response with Scryve.
Find open Australian and New Zealand tenders by state, then write a winning response with Scryve.
QUOTATIONS MUST INCLUDE: • Trailer to be a side tipper • King pin to be 50mm • Landing legs to be dual speed type and capable of safely carrying a full loaded trailer • Quoter nominated make and model • All tyres to be 11.00 – 22.5 tubeless radials. One spare tyre and rim assembly for the same specification as the others. Two spare carriers mounted in a vertical position under the floor of the trailer • Parker 6600 style P/N-66051616 & 66031616 coupling for the hydraulic hoist is to be mid mounted at the most forward point of the trailer. All coupling and sockets to be located and shielded from possible hoist oil leakage. Couplings and sockets must not be recessed into the body of the trailer • All electrical wiring must be protected with an insulated conduit over and above the natural outcase of the wire. An additional conduit must be securely attached to the body of the trailer. The electrical entry socket is to be Philips style SAE-J560 Utilux type P/N H1715BK mounted adjacent to the other couplings. The gates are to be air operated. All lamps must be protected to avoid damage when tipping • Brake airline couplings to be Ryco type P/N 320 and 303 and again mounted with the other sockets • Body floor to be at least 5mm thick Bisalloy 360 steel. Body must be at least 23 cubic metres capacity. Sides to be approximately 1 (one) metre in height and length to be approximately 9 (nine) metres long. Rear 1500mm of sides to be 5mm Bisalloy 360 and tailgate to be 5mm Bisalloy 360. Remainder of sides and front to be Bisalloy 80 • All welds must be run longitudinally on frame members. Special care must be taken to avoid weak spots at the finish of all welds • One copy of parts book must be supplied for all components of the trailer – CD preferred • Ring feeder to be attached to rear of trailer • Air suspension • Reversing alarm to be fitted to rear of trailer (variable pitch) RMS compliant • Mud guards to be attached to the side of trailer over front and rear wheel assemblies with mud flaps at rear • Axles to be fitted with disc brakes. Boosters and brake calliper components to be protected from stone damage where possible • Number of weeks (after official order) for delivery to be nominated. • Trailers to be delivered to Council’s Hillston Works Depot. Acceptance of delivery will be refused if trailer does not comply with specifications. • Enviro Tarp System (Electric) TRAILER OFFERED FOR SALE/TRADE-IN Plant Number - 2585 Rego Number: TD98TN – Registered until March 2027 Vin No: 6T9T25NT0H2NUM055 Purchased new from Tristar industries December 2017 SERVICE HISTORY 2 years old May 2019 Replaced brake pads on rear axle 3 years old March 2020 Fit new disc brake callipers to front axle group and replaced all disc brake pads 5 years old August 2022 Replaced rear axle, new bearings rotors and brake pads 6 years old February 2024 Replaced left front brake calliper. Replaced brake pads repairs to rollover tarp system 7 years old November 2025 Left hand front axle replaced disc brake calliper and slide bushe 8 years old January 2026 Replaced rear axle and shocks replaced front and middle calliper slide bushes. Repacked all wheel bearings. Replaced hub seals. Replaced all brake pads 8 years old April 2026 Replaced pivot pin bushed * Please note that Council will retain all two-way radios * Inspections may be arranged by contacting Council’s Office during normal business hours on (02) 6965 1900. All quotations must be completed on an Official Council Quotation Form and placed in a sealed envelope clearly marked ‘Confidential Vehicle Quotation’ and clearly state the quotation name and plant number. This form can be obtained from Council. Quotations are to be received at the Administration Centre Goolgowi or by email at tenders@carrathool.nsw.gov.au by 12 noon Wednesday 29th July 2026. All persons are advised that it is their responsibility to ensure that their quotation is received prior to the advertised closing date and time. • Faxed quotations will not be considered. • The highest / lowest or any quotation will not necessarily be accepted. Council Contact: Jake Clonan – Acting Manager Fleet (02) 6965 1900 or 0429 651 348 RICK WARREN GENERAL MANAGER PO BOX 12 GOOLGOWI NSW 26 Ph: 02 6965 1900 Email: council@carrathool.nsw.gov.au
A strong tender response is clear, compliant, and backed by evidence. These steps apply to most Australian and New Zealand public tenders.
Open the official listing and download the full tender pack. Note the response schedules, evaluation criteria, mandatory conditions, and the exact closing time and lodgement method.
Check licences, insurances, certifications, and any conformance requirements before you commit. A quick bid or no-bid decision saves days of wasted effort on a tender you cannot win.
Respond to each evaluation criterion directly and back your claims with concrete examples, referees, and past performance. Address the buyer’s stated need, not a generic capability statement.
Submit through the source portal well before the deadline. Late or incorrectly lodged bids are almost always rejected, so leave time for uploads, portal errors, and last-minute questions.
