Road Pavement Renewal Design – Southern District –Jacob Drive (Sussex Inlet) and KingsPtDrv

Overview Shoalhaven City Council invites tenders for the detailed design of two roads within the Southern District: Jacobs Drive, Sussex Inlet, and Kings Point Drive, Ulladulla. About The two roads require renewal within the Southern District of the Shoalhaven City Council local government area. The geotechnical investigation and pavement design for these roads have already been concluded, and the report will be made available to the successful tenderer. Objectives The objective of the project is the detailed design for renewal of pavement of the following roads in the Southern District of the Shoalhaven local government area: Jacobs Drive, Sussex Inlet, between CH0.217 to CH0.922km Kings Point Drive, Ulladulla, between CH2.89 to CH3.109km Scope The scope is contained within the following documents: SCC Concept Design Drawings – Jacobs Drive; SCC Concept Design Drawings – Kings Point Drive; and Annexure D – RFT – Civil Scope. The table within the concept design drawings identifies the elements of scope expected to be delivered, and these items correspond to items in the Civil Scope document. Both should be read in conjunction with each other, noting that not all sections within the Civil Scope document are relevant, only those identified in the scope tables. A design report is expected to accompany each milestone submission, providing detail and justification for elements of the design submitted up to that milestone. The following services are to be provided by the successful consultant: Survey Survey mark audit Geotechnical investigation and pavement design Underground utility service locating Roadway design, including parking Linemarking and signage design Stormwater drainage design Kerb and gutter design, including driveways Vehicular entry design Access and mobility design Environmental investigations and REF Road safety audit (RSA) Streetlighting audit and design Construction drawings and cost estimates AUS-SPEC / TfNSW construction documentation Safety-in-design assessment and report