MI187543- Lot 84 Marou Road, Mer (Kitchen Upgrade)
Tender Overview
About this tender
Overview Torres Strait Island Regional Council is seeking a contractor to carry out a kitchen upgrade at Lot 84 Marou Road, Mer, including replacement of kitchen cupboards, bench tops, splashbacks, associated plumbing and electrical services, and a gas stove replacement. Scope The scope includes: Replace kitchen cupboards (quantity 3.4m): disconnect associated plumbing and electrical services, remove and dispose of existing kitchen cupboards and splashbacks, and make good wall surfaces for new splashbacks Supply and install new kitchen cupboards with 600mm wide melamine bench tops, including a minimum of one bank of 4 drawers (each with a minimum 100mm high drawer side, Blum Metabox or approved equivalent, with a cutlery tray to the top drawer), a child deterrent cupboard (minimum 300mm wide), 16mm thick colour board doors, drawers and seen ends with 2mm PVC edging to match door material (colour TBA), 96mm chrome bow handles, cupboard carcass constructed from 16mm ply laminated white with 1mm white edging securely fixed, Blum 107 degree hinges or approved equal, and standard ply laminated kicker Supply and install a new stainless-steel combination sink, single drainer, 1&3/4 bowl, with waste and plug, and a Caroma Nordic single lever mixer or equal approved, including reconnection of water services with any necessary relocation repairs and connection of drainage to the existing waste Supply and install new Lamipanel splashbacks 600mm high with PVC capping and internal corners, continuing through and behind the stove to the floor, sealed onto bench tops with white silicone and glued with Lamipanel glue or approved equal Reconnect all associated electrical services, including installation of a minimum of 2 double socket outlets strategically located approximately 200mm above the bench, replacement of all existing GPOs with new, and installation of an electrical isolation switch to the wall 200mm above benchtop height adjacent to the stove Install bench tops, laminated 600mm wide x 33mm thick with 180 degree rolled edge, sealed with appropriate sealants, and paint touch up to all disturbed areas Supply and install a new freestanding fitkitchen cupboard (quantity 2m) as per the kitchen floor plan, including removal and disposal of the existing freestanding cupboard, making good floor/wall surfaces, 800mm wide melamine bench top as existing, doors, drawers and seen ends to 16mm thick colour board with 2mm PVC edging to match door material (colour TBA), 96mm chrome bow handles, carcass constructed from 16mm ply laminated white with 1mm white edging securely fixed, Blum 107 degree hinges or approved equal, standard ply laminated kicker, 800mm wide x 33mm thick bench top with 180 degree rolled edge, sealed with appropriate sealants, paint touch up to disturbed areas, and colour of doors and gable ends to match the main kitchen cupboard materials Supply and install new overhead units (quantity 2m) as indicated on the kitchen plan, 600mm high x 300mm deep, securely fixed to walls 600mm above the bench, including supply and installation of all hinges and handles to each cupboard door, with colour of doors and gable ends to match the main kitchen cupboard materials Supply and install a new pantry (quantity 0.6m), constructed of 16mm white laminated ply carcass with 1mm white edging, containing 5 shelves and 2 doors, with doors, seen ends and filler to 16mm thick colour board with 2mm PVC edging to match door/seen-end material (colour TBA), 96mm chrome bow handles, supported on either a standard ply laminated kicker or 150mm high stainless-steel legs and frame with a removable laminated ply kick front, overall height 2100mm, installed in the location shown on the kitchen plan Remove and replace the existing gas stove with a Chef Select GBC5266W Upright Gas Range or equally approved, including inspection of the regulator and certification of the gas supply/connection on completion, and fitting as per manufacturer's specification including installation of an anti-tilt bracket
How to respond to this tender
A strong tender response is clear, compliant, and backed by evidence. These steps apply to most Australian and New Zealand public tenders.
Read the requirements in full
Open the official listing and download the full tender pack. Note the response schedules, evaluation criteria, mandatory conditions, and the exact closing time and lodgement method.
Confirm you are eligible and it is worth bidding
Check licences, insurances, certifications, and any conformance requirements before you commit. A quick bid or no-bid decision saves days of wasted effort on a tender you cannot win.
Answer every criterion with evidence
Respond to each evaluation criterion directly and back your claims with concrete examples, referees, and past performance. Address the buyer’s stated need, not a generic capability statement.
Lodge early through the official portal
Submit through the source portal well before the deadline. Late or incorrectly lodged bids are almost always rejected, so leave time for uploads, portal errors, and last-minute questions.
Similar public opportunities
Review the lifecycle label on each related notice to see whether submissions are open.
- Submission deadline: 20 October 2026
Expression of Interest (EOI) - Civil Infrastructure Works - Kings College, Wallon, QLD
- Closes in 2 days21 October 2026, 02:00 PM Australia/Brisbane
Design, Supply and Installation of Solar (Events Centre)
- Submission deadline: 23 October 2026, 02:00 PM Australia/Brisbane
CAIRNS HOSPITAL - C Block Switchboard - Building Works
- Submission deadline: 23 October 2026, 02:00 PM Australia/Brisbane
MI187520- Lot 82 Kebisu Street, Iama (Bathroom Upgrade)
- Submission deadline: 23 October 2026, 02:00 PM Australia/Brisbane
MI187537- Lot 67 Kubin Road, St Pauls (Bathroom Upgrade)
- Submission deadline: 23 October 2026, 05:00 PM Australia/Brisbane
Baralaba Showgrounds Electrical Upgrade - Independent Design Peer Review and Site Inspection
